ajps

Automated Jaw Pallet System

This automatic jaw change chuck is ideal for high mix low volume production and use with automated robot load.

Product Description

This automatic jaw change chuck is ideal for high mix low volume production and use with automated robot load.

 

 AUTOMATED JAW PALLET SYSTEM

ROBOTIC AUTOMATION IS FINALLY A VIABLE SOLUTION FOR LOW-TO-MODERATE VOLUME PARTS MACHINING IN YOUR CNC LATHE OPERATION

• Jaw Pallet replacing method allows you to change all 3 jaws at once by replacing entire Pallet

• Deliver your work-pieces and Jaw Pallets by Robot or Shuttle

• Flexible capabilities for automated robotic systems and continuous operations unattended

• Ideal for high mix, low volume production

AJPS IS ENGINEERED WITH KITAGAWA QUALITY & WORKMANSHIP

• Precision high accuracy positioning and repeatability of pallet to chuck body

• Designed for protection from chips and contaminants

• Compact design uses less Z axis space

WATCH THE NEW VIDEO DEMONSTRATING HOW THE SYSTEM WORKS.

HOW THE KITAGAWA AUTOMATED JAW PALLET SYSTEM WORKS:

  • The Promano Quick Change Capable Grippers on the Robots end of arm allows the Robot to change the rough part (loading) Grippers and finish part (un-loading) Grippers for as many different parts required to be machined.
  • The Grippers also allow the Robot to change the Pallets (for the Workholding) for as many parts to be machined allowing total un-attended management of both part and Workholding handling.
  • The Kitagawa Automated Jaw Pallet System Special Chuck and Cylinder can be installed on one or both Spindles allowing the Jaw Pallets for the rough and finish part geometries to be changed.
  • The Robot loads the Pallet Gripper and inserts the Jaw Pallet into the chuck body where it is locked into place and ready for an internal or external gripping of the part.
  • These Jaw Pallets are designed to maintain very close tolerance between changes allowing high accuracy and repeatability of both locating and gripping geometries.
  • The Pallets are Equipped with Special Jaws and Dust covers designed to prevent any contaminants from intrusion and can be supplied with part specific engineered workholding solutions.
  • The Robot then changes its Kitagawa Promano Gripper to the first part geometry to be loaded and machined.
  • As the robot loads the first part to be machined the Kitagawa Automated Jaw Pallet grips it securely and accurately.
  • As the machining process starts the Robot then proceeds to change the Kitagawa Promano Quick Change capable Gripper to the finish geometry.
  • In this instance no change needed as both Gripers required for loading and un-loading the part or parts are on one end of Robot arm Bracket.
  • As the Robot loads the next part to be machined it confirms the presence of the finished part and un-loads the finish part allowing the process to continue for any quantities needed.
  • During the machining process the Robot continues with other tasks like inspection, part washing etcetera, both Machining and changing of the work handling happen internal of each other’s cycle time.
  • When the desired number of parts needed to be machined is reached and the final part is un-loaded the Robot then changes its Promano Gripper to accommodate the Kitagawa Automated Jaw Pallets.
  • The Robot then proceeds to equip the machine tool with the Workholding needed to machine the next group of completely different parts, in any quantity.
  • The Robot then changes its Promano Gripper to the next completely different part geometry to be machined and the process is repeated all over again.

AJPS

AJC diagram horizontal

This automatic jaw change chuck is ideal for high mix low volume production and use with automated robot load.

 

FEATURES

  • Face plate equipped with air seating confirmation as standard option
  • Face plate locator achieves high precision repeatability
  • Z axis stroke range extended due to smaller chuck body
  • Lighter body prevents wear and tear on spindle
  • Change three jaws quickly and easily by only replacing the face plate
  • Use with automated robot load – allows unattended operation overnight

 

SPECIFICATIONS

Size inch 10
Max. Speed min-1 3500
Jaw stroke for Main clamp mm 9.0
Plunger Stroke mm 20.0
Max static gripping force kN 81
Max. input kN 37.5
Mass of Faceplate kg 18
Mass (including Faceplate) kg 66
Inertia (including Faceplate) kg/m2 0.6
Thickness of chuck mm 170
Stroke for clamping Faceplate mm 22
Clamp force for Faceplate kN 45
Gripping diameter mm 54~254
Matching Cylinder YG385W19C